Induction Heating - Case Studies - Hardening
 
Application
 
  • Annulus ring for earth moving machines
 
Problem Faced
 
  • Desired hardness, case depth, hardness pattern, were not all being achieved at the same time.
  • The pieces were cracking.
 
Solution Provided
 
Through study of the component was made and trials were conducted. Right capacity and frequency of the machine was selected. A special coil and quenching arrangement were designed. A 250 KW/10 Khz equipment was supplied. Through trials were conducted and 100% desired results were obtained.
 
   
Eqipment Supplied
 
200 KW/3-10KHz